Wowza Streaming Distribution Service

The distribution-service-streaming-wowza module copies the media files to the Wowza application directory and generates a SMIL file containing the paths to those files, grouping those with the same flavor but different qualities. Then, for each configured streaming protocol, it generates the adequate entries in the MediaPackage and sets the necessary URLs and MIME-Types automatically.

The protocols supported and the transport format they use are summarized below:

HTTP(S)-based protocols, corresponding to the modern Streaming Formats
- HLS: (Live) Streaming from Apple
- HDS: Dynamic Streaming from Adobe
- DASH: MPEG-DASH Dynamic Adaptive Streaming
- SMOOTH: Microsoft's Smooth Streaming

Please note: Only the protocols HLS and DASH (with and without SSL) have been thoroughly tested.

Requirements

A Wowza Streaming Engine version >= 4.0 is required. Please pay special attention to the instructions re. cross-domain access.

Directory Structure

The structure how this module stores the SMIL and media files is important to understand how the Wowza server must be configured to properly work with Opencast.

This structure always follows the same pattern:

${org.opencastproject.streaming.directory}/<organization-id>/<channel-id>/<mediapackage-id>/<element-id>/<filename>

, where:

${org.opencastproject.streaming.directory} is this module's root directory, as configured in Opencast's configuration (see below)
<organization-id> is the identifier for the current organization (by default mh-default-org)
<channel-id> is the channel identifier. Normally, the Workflow Operation determines the value of this parameter; for instance, the operation publish-engage calls the Streaming Service with a hardcoded value for this property of engage-player
<mediapackage-id>, <element-id> and <filename> are different for each MediaPackageElement that this module distributes.

The organization ID is automatically assigned based on the server's DNS name (more info). Each organization (or tenant) is independent from the others defined in the system. For the media distribution, that means that each organization's media content is stored in separate directories, so the streaming applications should also be different, as we will see below.

Configuration

Edit the file etc/org.opencastproject.distribution.streaming.wowza.WowzaStreamingDistributionService.cfg and adjust the values to match those of your scenario. Most important are:
```
org.opencastproject.<tenant>.wowza.url=http(s)://<wowza-server>/<wowza-application>
org.opencastproject.<tenant>.wowza.port=<port_number>
```
The port numbers are only necessary when non-standard ports are used. In most cases, it is safe to comment them out or simply not include those properties in the file. Not defining the streaming url for a tenant will result in streams not being published for this tenant.

Set the streaming directory in $KARAF/etc/custom.properties:

org.opencastproject.streaming.directory=/mnt/opencast-drive/content/streams

Restart your Opencast server.

Installation on the Wowza side

Pre-requirements

Download/Purchase the Wowza Streaming Engine from the Wowza Homepage and install it according to their manuals.
The shared drive indicated in the org.opencastproject.streaming.directory in the custom.properties file in Opencast must also be mounted in the Wowza server. Please note that mount points do not necessarily match! (e.g. the path /mnt/opencast-drive-content-streams in the Opencast server might be mounted as /media/opencast-streams in the Wowza server).
Do not forget to open your firewall on ports 80 (HTTP) and, if you want to use SSL, 443.
You will have set your login credentials during the setup of Wowza. You will need these for the web UI.

Open http://<wowza-server>:8088/enginemanager and log in
Select "Application -> Add Application" in the top menu
Select "VOD Single Server"
Enter a name for the new application. You must use the same application name you have configured in $KARAF/etc/custom.properties (for instance: opencast-engage)
Application Description: Feel free to add a description.
Playback Types: Enable your desired streaming protocols
Options: Disable the global CORS
Content Directory: Mark the checkbox Use the following directory. The directory you should input is a subdirectory of the path indicated in the property org.opencastproject.streaming.directory defined in the file $KARAF/etc/custom.properties. That subdirectory's name is the organization's ID (mh_default_org by default).

For instance, if the org.opencastproject.streaming.directory is mounted in the Wowza Server as:
```
/mnt/opencast-streams
```
then the Content Directory for the default organization would be:
```
/mnt/opencast-streams/mh_default_org
```
In a multitenant Opencast setup, an organization with ID my_organization should have the Content Directory set to:
```
/mnt/opencast-streams/my_organization
```

Optional Settings

Opencast HTML5 Player is able to play videos from Wowza using adaptive streaming protocols. However, some browsers may experiment problems due to cross-domain issues, which means that we need to instruct Wowza to include the right Allow-Origin headers in its HTTP requests.

On the other hand, you may experiment problems with the MPEG-DASH protocol, depending on the encoding of the video sources.

All this can be configured in the "Options" section of the Wowza application:

Click on the tab "Properties" in your application
- If you can't see the "Properties" tab, go to "Users" > "Edit" > "Preferences" and select "Allow access to advanced properties and features"
Scroll down the page to "Custom"
Click the "Edit" button

Add the following Properties

Path	Name	Type	Value
/Root/Application/HTTPStreamer	cupertinoUserHTTPHeaders	String	**
/Root/Application/HTTPStreamer	mpegdashUserHTTPHeaders	String	**
/Root/Application/HTTPStreamer	mpegdashAdjustCTTSForFirstKeyFrameToZero	Boolean	true

Due to some limitations in Bitbucket's Markdown parser, we can write this value within a table because it contains a "pipe" symbol ("|"). The correct value for this property is:
```
Access-Control-Allow-Origin: *|Access-Control-Allow-Methods:GET, HEAD, OPTIONS
```

Do not forget to restart the application!

Players and Formats

Paella : HLS, DASH (over HTTP and HTTPS)

Encoding Profiles

Keep in mind that you have to adapt your encoding profiles when you want generate the videos to distribute via HLS or DASH. Specifically, if the videos with different qualities are not keyframe-aligned, they may not play smoothly or not play at all. You can find more information here.

Limitations

This module is able to correctly distribute new elements incrementally. That means that if some elements in a mediapackage are already distributed when another Distribute operation runs, the operation should run without errors. However, partial Retract operations are discouraged and cause the remaining elements to be no longer playable.

The recommended procedure to retract only some elements in a mediapackage is therefore:

Completely retract the mediapackage
Distribute again only the desired elements

The effects of this limitation are small, because the retract-engage workflow operation always retracts the whole Mediapackage and because partial retractions seem to have little to no practical application. These can however be performed by calling the corresponding REST endpoints. In such cases, users are encouraged to use the recommended method above.

Stream Security in Wowza

Please refer to Stream security topic.